Clearance Lines Company Profile WebShop

LED Tape Connectors

LED Tape Coupler with Wire
Specifications:
Contacts Nickel-plated body
Connection Insertion
Current Rating 5A
   
Weight g
Two solder less insertion type connectors connected with 100mm cable. For quick connection of single colour LED Tape. Suitable for single colour 10mm Tape.
Order Code   Each
703-405 Quick Connector - Quick Connector with Lead for Single Colour Tape 2.68

 

Quick Connector - for RGB LED Tape
Specifications:
Contacts Nickel-plated body
Connection Solder/Insertion
Current Rating 5A
   
Weight g
Pack of 5 flexible links comprising 150mm wire with a snap connector at each end for connecting lengths of LED tape to extend runs or negotiate corners. Snap connectors fit onto connection pads on the tape after paring back any silicone or waterproof coating to make an electrical connection without the need for solder. Where needed, these links can also be cut in half to provide bare wire connection to power supplies with screw terminals. A quick and mess-free solution for in-line connection in LED tape installations.
Order Code   Each
703-410 Quick Connector - for RGB LED Tape (Pack of 5) 3.90

 

LED Strip Connector with leads
Specifications:
Contacts Nickel-plated body
Connection Solder/Insertion
Current Rating 5A
   
Weight g
A solder less connector ready wired to 100mm of cable. Ideal for connecting Single Colour LED Strip to constant voltage power supplies. For 10mm wide Tape.
Order Code   Each
703-420 Quick Connector - Bare Tails for Single Colour Tape 0.74

 

RGB LED Tape Coupler RGB LED Tape Coupler
Specifications:
Contacts Nickel-plated body
Connection Insertion
Current Rating 5A
   
Weight g
These connectors are used for joining single colour LED strip together, no soldering required. Only use with 10mm wide tape.
Order Code   Each
703-425 Quick Connector - Quick Connector for Single Colour LED Tape 0.90

 

Single Colour LED Tape Coupler Single Colour LED Tape Coupler
Specifications:
Contacts Nickel-plated body
Connection Insertion
Current Rating 5A
   
Weight g
These connectors are used for joining RGB LED tape together, no soldering required. Only use with 10mm wide tape.
Order Code   Each
703-430 Quick Connector - Quick Connector for RGB LED Tape 0.90

 

Cross Coupler for RGB LED Strip/Tape
Specifications:
Contacts Nickel-plated body
Connection Insertion
Current Rating 5A
   
Dimensions mm
Weight g
A special coupler for making + or T junction with RGB LED Tape, suitable for 10mm wide tape only. (All LED Tape must be powered from the same DC supply).
Order Code   Each
703-435 Cross Connector for RGB LED Strip 1.95

 

9-Way 8mm Transparent COB Connector (5pk)
  • Insert the LED Tape into the connector in the desired configuration and crimp with a pair of pliers.
  • For use with 8mm wide COB LED Tape
  • Take care that the polarity is in the correct orientation before crimping on the connectors. The + sides are marked on the connectors. Diagrams are in the instruction manual.

 
Specifications:
Voltage 36Vdc (Max)
Connection Insertion
Current Rating 5A
Tape Type Single Colour COB
Gauge 0.35-0.5mm2 AWG20-22
IP Rating IP20
Dimensions 5.3 x 9.6 x 15.4mm
Weight 40g
Download Handbook > Download the Handbook for full specifications and applications
Transparent COB tape connectors for a seamless installation. Connect your tape together in multiple configurations and then crimp with pliers to ensure a gap free professional look. No need for soldering!
Order Code   Each
703-415 9-Way 8mm Transparent COB Connector (5pk) 4.50

 

  Call in By Phone Order by Post Order Online  

 

 

sales@esr.co.uk

Tel: 0191 251 4363

  
 

• Orders accepted subject to our Terms and Conditions •

All Prices are in Pounds Sterling and Exclude VAT