Clearance Lines Company Profile WebShop

Microphone Inserts

Dynamic Microphone Cartridge
Specifications:
Frequency Response 100 - 10kHz
Sensitivity 2.5mV/Pa/1kHz 
Impedance 200Ω
   
Dimensions 11.5 x 23mmŲ
Suitable Pre-Amplifiers >
A 200Ω dynamic microphone insert which has Omni directional pick up characteristics.
Order Code   Each  
201-010 SA 18 200R Dynamic Microphone Capsule 7.98  

 

MD-110 Microphone Cartridge
Specifications:
Frequency Response 50 - 16kHz
Sensitivity 2mV/Pa/1kHz
Impedance 600Ω
   
Dimensions 41.0 x 27mmŲ
Suitable Pre-Amplifiers >
A dynamic microphone cartridge which has a cardioid pick up characteristics.
Order Code   Each  
MD-110 600R Dynamic Microphone Cartridge 6.42  

 

Electret Microphone Insert, 2-Terminal
Specifications:
Frequency Response 50 - 12kHz
Load Resistor 300Ω
Coupling Capacitor 1µF
Power Supply 1.5 - 10VDC (0.4mA)
Dimensions 7 x 10mmŲ
Suitable Pre-Amplifiers >
General purpose electret microphone insert, with a Omni directional pick up pattern.
Order Code   Each  
201-015 Electret Microphone Capsule, 2-Terminal 1.15  

 

Electret Microphone Insert, PCB Mounting
Specifications:
Frequency Response 50 - 16kHz
Sensitivity 7.9mV/Pa/1kHz 
Load Resistor 2.2kΩ
SNR >58dB
Coupling Capacitor 0.1 - 4.7µF
Power Supply 1.5 - 10VDC (0.5mA)
Dimensions 6.7 x 9.7mmŲ
Suitable Pre-Amplifiers >
High-quality electret microphone capsule which has Omni directional pick up characteristics. Suitable for PCB mounting, pin spacing 2.5.
Order Code   Each  
201-018 High Quality Electret Microphone Insert, PCB Mounting 1.89  

 

PCB Electret Microphone
Specifications:
Frequency Response 50 - 16kHz
Sensitivity 1V/1µbar, 1KHz
Load Resistor 1kΩ
SNR >40dB
Coupling Capacitor 0.1 - 4.7µF
Power Supply 4.5VDC (0.5mA)
Dimensions 10 x 10mmŲ
Suitable Pre-Amplifiers >
High-quality electret microphone capsule which has Omni directional pick up characteristics. Suitable for PCB mounting
Order Code   Each  
201-026 High Quality Electret Microphone Insert, PCB Mounting 1.23  

 

Electret Microphone Insert, with cable
Specifications:
Frequency Response 50 - 16kHz 
Sensitivity 7.9mV/Pa/1kHz 
Load Resistor 2.2kΩ
SNR >58dB
Coupling Capacitor 0.1 - 4.7µF
Power Supply 1.5 - 10VDC (0.5mA)
Dimensions 6.7 x 9.7mmŲ
Suitable Pre-Amplifiers >
High-quality electret microphone capsule which has Omni directional pick up characteristics. Supplied with 150mm of screened cable.
Order Code   Each  
201-019 High Quality Electret Microphone Insert, with cable 3.02  

 

Miniature Electret Microphone Insert
Specifications:
Frequency Response 20 - 16kHz
Sensitivity 6.3mV/Pa/1kHz 
Load Resistance 2.2kΩ
SNR >58dB
Coupling Capacitor 0.1 - 4.7µF
Power Supply 1.5 - 10VDC (0.5mA)
Dimensions 2.7 x 6mmŲ
Suitable Pre-Amplifiers >
High-quality subminiature back electret microphone capsule with Omni directional pick up characteristics.
Order Code   Each  
201-023 Miniature Electret Microphone Insert, 2-Terminal 3.02  

 

Electret Microphone Insert, 2-Terminal
Specifications:
Frequency Response 100 - 16kHz
Sensitivity 3.2mV/Pa/1kHz 
Load Resistor 680Ω
SNR >60dB
Coupling Capacitor 0.1-4.7µF
Power Supply 1.5 - 10VDC (0.5mA)
Dimensions 5 x 9.7mmŲ
Suitable Pre-Amplifiers >
High quality back electret microphone insert with cardioid characteristics.
Order Code   Each  
201-025 Electret Microphone Capsule, 2-Terminal 4.01  

 

Holder for 6.0mmŲ Electret Microphones
Specifications:
Material Rubber
Insert Diameter 6.0mm
   
Dimensions 10 x 17mm
Electret microphone capsule holder, for the protection and correct insertion of electret microphone cartridges. Suitable for cartridges with a diameter of 6.0mm
Order Code   Each  
201-035 Holder for 6.0mmŲ Electret Microphones 0.63  

 

Holder for 9.7mmŲ Electret Microphones
Specifications:
Material Rubber
Insert Diameter 9.7mm
   
Dimensions 8.0 x 9.5mmŲ
Electret microphone holder, for the protection and correct insertion of electret microphone inserts. Suitable for cartridges with a diameter of 9.7mm
Order Code   Each  
201-034 Holder for 9.7mmŲ Electret Microphones 0.99  

 

  Call in By Phone Order by Post Order Online  

 

 

sales@esr.co.uk

Tel: 0191 251 4363

  
 

• Orders accepted subject to our Terms and Conditions •

All Prices are in Pounds Sterling and Exclude VAT