Clearance LinesCompany ProfileWebShop
Velleman PCSGU250 Scope and Function GeneratorVelleman Kits

Velleman USB PC Scope and Function Generator


Transient Recorder

Bode Plotter

Spectrum analyser

Specification Features:

    • Function generator:
      • Crystal-based stability
      • Standard waveforms: sine, square and triangle
      • Predefined library waveforms included: sine(x)/x, DCV, sweep
      • Amplitude range: 100mVpp to 10Vpp @ 1KHz// 600ohm load / 0V offset
      • Offset: from 0 to -5V or +5V max. (resolution 0.4% of full scale)
      • Vertical resolution: 8 bits
      • Square wave rise/fall time: 0.2µs
      • Sample rate: 12.5MHz
      • Typical sine wave distortion (THD): < 1%
      • Output impedance: 50ohm
      • Frequency range: from 0.005Hz to 500kHz
    • Oscilloscope:
      • Auto set-up function and X10 option
      • Pre-trigger function
      • Readouts: True RMS, dBV, dBm, p to p, Duty cycle, Frequency
      • Bandwidth: two channels DC to 12 MHz ±3dB
      • Input impedance: 1 MΩ / 30pF
      • Maximum input voltage: 30V (AC + DC)
      • Time base: 0.1µs to 500ms per division
      • Input range: 10mV to 3V/division
      • input sensitivity: 0.3mV display resolution
      • Record length: 4K samples / channel
      • Sampling frequency: 250Hz to 25MHz
    • Transient recorder:
      • Automatic storage of data
      • Automatic recording for more than 1 year
      • Record and display of screens
      • Timescale: 20ms/Div to 2000s/Div
      • Max record time: 9.4hour/screen
      • Max. number of samples: 100/s
      • Min. number of samples: 1 sample/20s
    • Bode Plotter:
      • Automated sync between oscilloscope and generator
      • Logarithmic scale option
      • Volt or dB display scale
      • Phase plot option
      • Voltage range: 10mV, 30mV, 0.1V, 0.3V, 1V, 3V
      • frequency range: 1kHz , 10kHz, 100kHz, 500kHz
      • Frequency start: 10Hz, 100Hz, 1kHz, 10kHz
    • Spectrum analyser:
      • Linear or logarithmic timescale
      • Operating principle: FFT (Fast Fourier Transform)
      • FFT input channel: CH1 or CH2
      • Zoom function

      • Frequency range: 0 .. 120Hz to 12MHz
      • FFT resolution: 2048 lines

    • Minimum system requirements:

      • IBM compatible PC
      • Windows™ 2000, XP, Vista *
      • SVGA display card (min.1024 x 768)
      • Mouse
      • USB port 1.1 or 2.0
      • CD ROM player

Read the fully Illustrated Manual for PCSGU250

PDF Download


from USB port (500mA)




205 x 55 X 175mm




Feature-packed PcLab2000-LT software for two channel oscilloscope, spectrum analyser, recorder, bode plotter and function generator. You can create your own waveforms using the integrated signal wave editor. For automated measurements, it is even possible to generate wave sequences, using file or computer RS232 input.

Additional software to up grade and improve this product is available from the Velleman support section on there website.

Order Code Each 
PCSGU250Velleman USB PC Scope and Function Generator134.99 


 Call inBy PhoneOrder by PostOrder Online

Tel: 0191 251 4363

Fax: 0191 252 2296


• Place your Order  here • Orders accepted subject to our Terms and Conditions

All Prices are in Pounds Sterling and Exclude VAT