| Velleman K8800 Vertex Delta 3D Printer Kit |  |
 | Specification Features: |
- Printing:
- print technology: Fused Filament Fabrication (FFF - FDM)
- layer resolution: standard 0.1 mm (maximum: 0.2 mm - minimum: 0.05 mm)
- large build volume: 200 mm build platform diameter, 225 mm build height
- print speed: 20-50 mm/s (can go up to 75 mm/s)
- travel speed: 180-200 mm/s
- build plate surface: removable layer of BuildTak™ (K8800-BT)
- filament diameter: 1.75 mm (accepts all filament spools with a mounting hole = 53 mm) - open filament policy
- prints: PLA, ABS, TPU, PET and others
- nozzle: E3D compatible
- nozzle diameter: 0.35 mm (one nozzle supplied)
- maximum nozzle operating temperature: 295°C
- bed compensation: automatic bed compensation performed by the nozzle (no manual calibration needed)
- calibration: automatic first-time set-up calibration
- couplers: backlash free magnetic effector-couplers
- advanced safety features: auto shutdown when print head detaches or temperature is incorrect (most unlikely)
- filament run out detector: automatic pause and reload when printer runs out of filament
- change filament function while printing: this means that you can print objects with multiple filaments/colours
- effective pause function: pause your print job without nozzle leakage
- end stops: infrared based end stops
- Software:
- firmware: modified Open Source Marlin 3D Printer, firmware is user upgradable
- software: custom Repetier version (Windows) - Cura profiles (Mac)
- Hardware:
- dimensions: W 35 x D 35 x H 77 cm (without filament spool)
- frame: rigid aluminium extrusion risers and 4 mm aluminium top and bottom plates for a sturdy frame and precision ground 100 mm vertical rods and brass bushings
- fully Open-Source (hard- and software)
- weight: 10 kg
- ambient operating temperature: max. 30°C
- storage temperature: -10°C to +50°C
- hybrid kit: quick and straightforward build, no soldering required
- Electrical:
- communication: SD card or USB 2.0 (automatic SD card recognition)
- controller board: AVR ATmega2560 based
- display: 128 x 64 px graphic display with blue backlight
|
| Watch Video Clip
> |
 |
| 
|
Read the fully Illustrated Assembly Manual for K8800 |  | Filament | ABS and PLA (Use Only Velleman Filament Wire) |
Power Supply | 100 - 240 VAC 50-60 Hz 90W max |
Dimensions | mm |
Weight | kg |
| |
https://youtu.be/FtF3quCa2Uo |
The Vertex Delta is an all-round and reliable 3D printer designed to print refined objects to complete your projects.
Aside from the excellent print quality and user-friendliness, the Vertex Delta also comes with a lot of innovative perks to make your 3D printing experience more engaging and pleasant. Advanced safety features, a filament run out detector, a mid print filament replacement function and automatic calibration and bed compensation are only a few of the latest technological additions.
This Vertex comes as a hybrid kit (Modular) which means that after a straightforward and quick assembly, the K8800 can be assembled in a coupler of hours, no soldering required. Then the Delta 3D printer is ready to run. And don't worry about a precise build, because this device will take care of all necessary procedures to ensure a perfect first print.
Choose for reliability and for making quality 3D projects, choose Vertex and make it happen! |
|
| Order Code | | Each | | | K8800 | Velleman Vertex Delta 3D Printer |
- | |
|
