Clearance LinesCompany ProfileWebShop
Velleman 1 Channel DMX Controlled Power Dimmer KitVelleman Kits

1 Channel DMX Controlled Power Dimmer Kit

Specification Features:

  • Suitable for resistive loads like incandescent lamps and mains voltage halogen lighting
  • System addressability: 512 unique addresses, selectable with DIP switch
  • Status LED for power and error detection
  • Toroidal filtering for low noise (according to EN55015)
  • Stand alone "test" mode
  • Control source: DMX-512, 3 pin XLR socket included
  • Load capacity: max. 1000 W @ 230V (5A) or 500W @ 115V
  • Power Input: 115/230 VAC

Read the fully Illustrated Assembly Manual for K8039

PDF Download

Transformer

 

Case

 

Dimensions (PCB)

150 x 60 x 45mm

Weight

kg

  

This kit allows you to control a lamp or group of lamps through a DMX signal. The DMX protocol was developed by USITT in 1986 with the purpose of controlling dimmers, scanners, moving heads and other lighting devices with simple wiring. It is mainly being used in theatres and discos, but you can use it in any place where a central or automated lighting is needed. Use our "USB controlled DMX interface" K8062 (kit version), VM116 (built version) or any other control console compliant with the DMX-512 protocol as a controller.

Additional software to up grade and improve this product is available from our download section on this website.

Order Code Each 
K8039Velleman 1 Channel DMX Controlled Power Dimmer Kit24.35 

 

 

sales@esr.co.uk

Tel: 0191 251 4363

Fax: 0191 252 2296

 
 

Place your Order  here Orders accepted subject to our Terms and Conditions

All Prices are in Pounds Sterling and Exclude VAT