Clearance LinesCompany ProfileOrder Form

HSS Drill Bits

High Speed Steel Drill Bit
Specifications:
Shaft Diameteras Drill Size
MaterialHigh Speed Steel
  
  
 Drill Set>16 Piece Dill Set
A range of High Speed Steel bits with parallel shanks, suitable for drilling printed circuit boards. ( 0.3 - 0.95mmØ)
Order Code 110+50+ 
274-0300.30mm HSS Parallel shank drill bit0.600.400.36 
274-0350.35mm HSS Parallel shank drill bit0.600.400.36 
274-0400.40mm HSS Parallel shank drill bit0.600.400.36 
274-0450.45mm HSS Parallel shank drill bit0.600.400.36 
274-0500.50mm HSS Parallel shank drill bit0.600.400.36 
274-0550.55mm HSS Parallel shank drill bit0.600.400.36 
274-0600.60mm HSS Parallel shank drill bit0.600.400.36 
274-0650.65mm HSS Parallel shank drill bit0.600.400.36 
274-0700.70mm HSS Parallel shank drill bit0.600.400.36 
274-0750.75mm HSS Parallel shank drill bit0.600.400.36 
274-0800.80mm HSS Parallel shank drill bit0.600.400.36 
274-0850.85mm HSS Parallel shank drill bit0.600.400.36 
274-0900.90mm HSS Parallel shank drill bit0.600.400.36 
274-0950.95mm HSS Parallel shank drill bit0.600.400.36 

 

High Speed Steel Drill Bit
Specifications:
Shaft Diameteras Drill Size
MaterialHigh Speed Steel
  
  
 Drill Set>16 Piece Dill Set
A range of High Speed Steel bits with parallel shanks, suitable for drilling printed circuit boards. ( 1.0 - 3.0mmØ)
Order Code 110+50+ 
274-1101.0mm HSS Parallel shank drill bit0.400.360.32 
274-1111.1mm HSS Parallel shank drill bit0.400.360.32 
274-1121.2mm HSS Parallel shank drill bit0.400.360.32 
274-1131.3mm HSS Parallel shank drill bit0.400.360.32 
274-1141.4mm HSS Parallel shank drill bit0.400.360.32 
274-1151.5mm HSS Parallel shank drill bit0.400.360.32 
274-1161.6mm HSS Parallel shank drill bit0.400.360.32 
274-1171.7mm HSS Parallel shank drill bit0.400.360.32 
274-1181.8mm HSS Parallel shank drill bit0.400.360.32 
274-1191.9mm HSS Parallel shank drill bit0.400.360.32 
274-1202.0mm HSS Parallel shank drill bit0.400.360.32 
274-1212.1mm HSS Parallel shank drill bit0.400.360.32 
274-1222.2mm HSS Parallel shank drill bit0.400.360.32 
274-1232.3mm HSS Parallel shank drill bit0.400.360.32 
274-1252.5mm HSS Parallel shank drill bit0.400.360.32 
274-1303.0mm HSS Parallel shank drill bit0.660.590.53 

 

HSS Reduced shank drill bit
Specifications:
Shaft Diameter2.35mmØ
MaterialHigh Speed Steel
  
  
 Drill Set>16 Piece Dill Set
High speed steel drill bits with a 2.35mm shank. This range offers greater resistance to snapping over the standard High Speed Steel parallel drill bits and are a low cost alternative to tungsten carbide bits.
Order Code 110+50+ 
274-3060.60mm HSS Reduced shank drill bit1.181.060.94 
274-3070.70mm HSS Reduced shank drill bit1.181.060.94 
274-3080.80mm HSS Reduced shank drill bit1.181.060.94 
274-3090.90mm HSS Reduced shank drill bit1.181.060.94 
274-3101.00mm HSS Reduced shank drill bit1.181.060.94 
274-3111.1mm HSS Reduced shank drill bit1.181.060.94 
274-3121.2mm HSS Reduced shank drill bit1.181.060.94 
274-3131.3mm HSS Reduced shank drill bit1.181.060.94 
274-3141.4mm HSS Reduced shank drill bit1.181.060.94 
274-3151.5mm HSS Reduced shank drill bit1.181.060.94 
274-3161.6mm HSS Reduced shank drill bit1.181.060.94 
274-3171.7mm HSS Reduced shank drill bit1.181.060.94 

Tungsten Drill Bits

Reground Tungsten drill bit
Specifications:
Shaft Diameter3.2mmØ
MaterialHigh Speed Steel
  
  
High quality pre-used bits which have been reground to be as sharp as new. The bits which have been used on CNC machines by leading PCB manufacturers, once reground they are no longer suitable for CNC machines due to their shorter length so they are ideal for manual drill stands etc.
Order Code 110+
274-5050.60mm Reground Tungsten drill bit2.241.79
274-5100.70mm Reground Tungsten drill bit2.241.79
274-5140.80mm Reground Tungsten drill bit2.241.79
274-5160.85mm Reground Tungsten drill bit2.241.79
274-5200.90mm Reground Tungsten drill bit2.241.79
274-5250.95mm Reground Tungsten drill bit2.241.79
274-5301.00mm Reground Tungsten drill bit2.241.79
274-5351.05mm Reground Tungsten drill bit2.241.79
274-5401.10mm Reground Tungsten drill bit2.241.79
274-5451.15mm Reground Tungsten drill bit2.241.79
274-5501.20mm Reground Tungsten drill bit2.241.79
274-5521.30mm Reground Tungsten drill bit2.241.79
274-5541.40mm Reground Tungsten drill bit2.241.79
274-5551.50mm Reground Tungsten drill bit2.241.79
274-5601.60mm Reground Tungsten drill bit2.241.79

 

Tungsten Carbide drill bit
Specifications:
Shaft Diameter3.2mmØ
Length38mm
MaterialHigh Speed Steel
  
High quality solid shank tungsten carbide drill bits. These bits offer a considerably longer life than standard HSS bits particularly when used on epoxy glass fibre boards. A vertical drill stand is recommended when using these bits.
Order Code 15+  
274-7060.6mm Tungsten Carbide drill bit2.882.45  
274-7080.8mm Tungsten Carbide drill bit2.882.45  
274-7090.9mm Tungsten Carbide drill bit2.882.45  
274-7101.0mm Tungsten Carbide drill bit2.882.45  
274-7121.2mm Tungsten Carbide drill bit2.882.45  
274-7141.4mm Tungsten Carbide drill bit2.882.45  
274-7161.6mm Tungsten Carbide drill bit2.882.45  
274-7202.0mm Tungsten Carbide drill bit2.882.45  

 

 

sales@esr.co.uk

Tel: 0191 251 4363

Fax: 0191 252 2296

 
 

• Place your Order here • Orders accepted subject to our Terms and Conditions

All Prices are in Pounds Sterling and Exclude VAT