Clearance LinesCompany ProfileOrder Form

Arduino Ethernet Rev3 with PoE

Arduino Ethernet Rev3 with PoE

Specifications:

MicrocontrollerATmega328
Operating Voltage5Vdc
Input Voltage (Recommended)7 - 12Vdc
Input Voltage (Maximum)6 - 20Vdc
Digital In/Out Pins14
PMW In/Out Pins4
Analogue Input Pins6
DC Current per In/Out Pins40mA
DC Current for 3.3V Pin50mA
Flash Memory32kB
Flash Memory for Bootloader0.5kB
SRAM2kB
EEPROM1kB
Clock Speed16MHz
  
  

Dimensions

68.6 x 53.4mm

Weight

g

Download Manual >Download the Handbook for full specifications and applications
The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. The Arduino USB-to-Serial adapter or any FTDI-style USB-to-serial connector can be used to program it.

It includes power-over-Ethernet (PoE) module to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.

Arduino Ethernet Rev3 with PoE
Order Code Each 
A000074Arduino Ethernet Rev3 with PoE47.78

 

 

sales@esr.co.uk

Tel: 0191 251 4363

Fax: 0191 252 2296

 
 

Place your Order  here Orders accepted subject to our Terms and Conditions

All Prices are in Pounds Sterling and Exclude VAT