|
Velleman Educational LCD Oscilloscope Kit |
 |
|
 |
Specification Features: |
- High contrast LCD: 64 x 128 pixels with white LED backlight (58 x 40mm)
- Maximum sample rate: 1MS/s for repetitive signals, 100kS/s in real time
- Input amplifier bandwidth: 200kHz (-3 dB)
- Measurements can be performed up to: 100kHz
- Input impedance: 100kohm // 20pF
- Maximum input voltage: 30Vpeak (AC + DC)
- Input coupling: DC and AC
- AD resolution: 8 bits
- Run modes: run, single
- Trigger level adjustable: in 16 steps
- Timebase range: in 15 steps, 10µs/division to 500ms/division
- Input sensitivity range: in 6 steps, 100mV/division to 5V/division
- Test output: 1.95kHz / 3.3Vpp
- Full auto set up for: Volt/div and time/div (or manual)
- Sensitivity down to 10mV
- Readouts: DC, AC+DC, true RMS, dBm, Vpp, min. & max.
- Time and voltage markers readout
- Frequency readout (through markers)
- Battery operated: 4 x AAA batteries
- Power save mode
|
|
Read the fully Illustrated
Manual for WSEDU08 |
 |
Power Supply |
6Vdc (100mA) |
|
Case |
|
|
Dimensions |
80 x 115 x 40mm |
|
Weight |
190g |
| |
|
|
Build your own oscilloscope and learn how to visualize signals. See the
signals you learn about in real life! Despite the low cost, this
oscilloscope has a lot of features found only on expensive units like
signal markers, frequency, dB, true RMS readouts,... A powerful
auto-setup function will get you going in a snap!
This scope
cannot be used to perform measurements on voltages higher than 30Vpp.
Use the
WSEDU08 oscilloscope tutor kit to
explore the functions of your EDU08 scope.
|
| Order Code |
|
Each |
|
| WSEDU08 |
Whadda Educational LCD Oscilloscope Kit |
40.22 |
|
|
